AK -1300 THE ROLL SACK MACHINE WITH PERFORATOR

 

Teknik Detaylar

•    This  machine suitable for automatically making LDPE/HDPE heavy duty bags from roll to roll 
•    Thickness of the film can be welded: Minimum 60 microns(2x30-Tubular form), Maximum 1000microns(2x500-Tubular form or 
    4x250-Gusseted tubing form) 
•    The length of the film can be processed: Minimum 200mm(20cm), Maximum 99999mm(100mt.) 
•    PLC controlled operation control panel
•    TFT screen with touchpad 
•    Single unwinder, Double winders
•    Holders of bobbin with pneumatic shaft 
•    Three independent rezistance wires(heater) can use independently for making a weld and controlled by digital impulse control system 
    1. heater  -    2. heater  -    3. heater  -    1. and 2. heaters  - 1. and 3. heaters -     2. and 3. heaters 
•    Only Perforation is possible without welding
•    Only Transfering is possible without measurement 
•    Maximum 600 mm diameter of bobbin can be loaded on unwinder shaft 
•    Maximum 450 mm diameter of bobbin can be loaded on winder shafts 
•    Maximum 300 kg. of bobbin can be loaded on unwinder and winder shafts
•    Diameter(outside) of shaft(winder/unwinder); 70mm ” it is for 76mm (inner diameter) of carton bobbin” 
•    A.C. motor speed control drivers 
•    Output digital counter (mm measurement) 
•    Alarm for resistance wire breake
•    Emergency auto-stop system with reflective photocell 
•    Optionally; color photocell can be affixed for printed products. 
•    Power Consumption;  During working time it is between 1,0- 2,5kW 
•    Total power;3P 380V+N+MP, 6.75kW, 50Hz 
•    Total air supply; 6-8 bar 
•    It is possible to produce one side open bag on two separate bobbin with cold slicing knife
    Shaft safety chucks  
 

 

MODEL AK 1300-100 AK 1300-125 AK 1300-150 AK 1300-175 AK 1300-200 AK 1300-240 AK 1300-260
Working Lenght Max 950 mm Max 1200 mm Max 1450 mm Max 1700 mm Max 1950 mm Max 2350 mm Max 2550 mm
Machine Lenght 1700 mm 1950 mm 2200 mm 2450 mm 2700 mm 3100 mm 3300 mm
Machine Width 2160 mm 2160 mm 2160 mm 2160 mm 2160 mm 2160 mm 2160 mm
Machine Height 1300 mm 1300 mm 1300 mm 1300 mm 1325 mm 1350 mm 1350 mm