Teknik Detaylar
• This machine suitable for automatically making LDPE/HDPE heavy duty bags
• Thickness of the film can be welded: Minimum 60 microns(2x30-Tubular form), Maximum 1000microns(2x500-Tubular form or
4x250-Gusseted tubing form)
• The length of the film can be processed: Minimum 200mm(20cm), Maximum 99999mm(100mt.)
• PLC controlled operation control panel
• TFT screen with touchpad
• Single unwinder
• Holders of bobbin with pneumatic shaft
• Three independent rezistance wires(heater) can use independently for making a weld and controlled by digital impulse control system
1. heater - 2. heater - 3. heater - 1. and 2. heaters - 1. and 3. heaters - 2. and 3. heaters
• Only cutting is possible without welding
• Only Transfering is possible without measurement
• Maximum 600 mm diameter of bobbin can be loaded on unwinder shaft
• Maximum 300 kg of bobbin can be loaded on unwinder shaft
• Diameter(outside) of shaft (unwinder); 70mm ” it is for 76mm (inner diameter) of carton bobbin”
• A.C. motor speed control drivers
• Output digital counter (mm measurement)
• Alarm for resistance wire breake
• Emergency auto-stop system with reflective photocell
• Optionally; color photocell can be affixed for printed products
• Power Consumption; During working time it is between 1,0- 2,5kW
• Total power; 3P 380V+N+MP, 5.50 kW, 50Hz
• Total air supply; 6-8 bar
• it is possible to produce one side open bags with cold slicing knife
Shaft safety chucks
MODEL | AK 1200-100 | AK 1200-125 | AK 1200-150 | AK 1200-175 | AK 1200-200 | AK 1200-240 | AK 1200-260 |
Working Lenght | Max 950 mm | Max 1200 mm | Max 1450 mm | Max 1700 mm | Max 1950 mm | Max 2350 mm | Max 2550 mm |
Machine Lenght | 1700 mm | 1950 mm | 2200 mm | 2450 mm | 2700 mm | 3100 mm | 3300 mm |
Machine Width | 1610 mm | 1610 mm | 1610 mm | 1610 mm | 1610 mm | 1610 mm | 1610 mm |
Machine Height | 1300 mm | 1300 mm | 1300 mm | 1300 mm | 1325 mm | 1350 mm | 1350 mm |